Ash wood veneer 48" x shops 96" with wood backer 1/25'' thickness A grade quality

Ash wood veneer 48" x 96" with wood backer (4 x 8 x 1/25" thickness) A grade quality. Photos are representative of the product and will vary from actual product in color and grain since this is a natural product. Some people prefer wood backer over paper backer because it is thicker (covers minor imperfections better) and may bond a little better though both work well. Ash is a light yellowish color and will darken some when finished as can be seen in wet photos. Some pictures may be of various sizes. Count on quality. Each sheet is carefully inspected and packaged by our company, not drop shipped as many sellers are doing without seeing the product. Backer is Okuome Mahogany which is standard for this type of product and shown in last photo.

Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.

Visit My Store: JSO Wood Products

Other sizes, backers, and unbacked veneer may be available.

About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products come with complete application instructions that are simple and clear. For raw veneer or shops un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness: Paper-backed veneers are generally 1/40 and wood-backed veneers are 1/25. Raw plain veneer with no backing is about 1/32-1/42.

How to cut: generally cut with a razor knife or similar tools and some type of straight edge.

How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.

How to finish: most any conventional finishing products can be used with veneer that is applied correctly.

Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldnt impact overall quality or satisfaction. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.


SKU:mx1_111306351363_D3*