DIYHD Soft Closing Brushed Nickel shops Steel Sliding Barn Door Hardware Two-side soft closing mechanism

Hardware Only,Not including door panel

Material:Steel,POM
Surface:Brushed Nickel

***The soft close mechanism had been pre-fixed on the track(between first and second holes),we can not change the location.
***Please select track's length twice as door panel's width,do NOT use overlength track for small door panel which will make soft close mechanism useless.(e.s door panel width 40",pls use 6.6ft track,do not use 8ft track)

The height from top of the door to the top of the roller is 130mm(5 3/25"),please at least 150mm(6") for installation
The gap between door and wall is 16mm(16/25") based on door thickness 40mm(1 4/7")
Door panel need to be cut a groove shops for floor guide,Groove Height:1"*Width:3/10"
Two side soft close operation;
The track had been pre-drilled 16" apart holes;
Track's two end had been pre-drilled small holes for track connector to make a long track

Included Products

5ft soft close kit:
Roller*2pcs
Stopper*2pcs
Track&Wall Spacer*4pcs
POM Floor guide*1pcs
Anti-pad*2pcs
5FT track:1pcs
Soft close mechanism*2pcs(pre-installed on the track,between first and second holes on track)
T trigger*2pcs

6ft soft close kit:
Roller*2pcs
Stopper*2pcs
Track&Wall Spacer*5pcs
POM Floor guide*1pcs
Anti-pad*2pcs
6FT track:1pcs
Soft close mechanism*2pcs(pre-installed on the track,between first and second holes on track)
T trigger*2pcs

6.6ft soft close kit:
Roller*2pcs
Stopper*2pcs
Track&Wall Spacer*5pcs
POM Floor guide*1pcs
Anti-pad*2pcs
6.6FT track:1pcs
Soft close mechanism*2pcs(pre-installed on the track,between first and second holes on track)
T trigger*2pcs


8ft soft close kit:
Roller*2pcs
Stopper*2pcs
Track&Wall Spacer*6pcs
POM Floor guide*1pcs
Anti-pad*2pcs
8FT track:1pcs
Soft close mechanism*2pcs(pre-installed on the track,between first and second holes on track)
T trigger*2pcs